| MRC |
Requirement Statement |
Characteristics |
| AGJS |
PITCH DIAMETER |
0.375 INCHES NOMINAL |
| AWLS |
CONNECTION TYPE |
INLET AND OUTLET |
| AXFG |
SPLINE PRESSURE ANGLE IN DEG |
30.0 |
| AZFH |
HOUSING SURFACE TREATMENT |
ANODIZED |
| AXFP |
DISPLACEMENT TYPE |
CONSTANT |
| AXFB |
MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE |
3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND AND RIGHT-HAND |
| AXFQ |
CONSTANT DISPLACEMENT PER REVOLUTION |
0.095 CUBIC INCHES |
| ABSA |
SPLINE QUANTITY |
12 |
| AXFH |
SPLINE LENGTH |
0.938 INCHES NOMINAL |
| ABUJ |
THREAD SIZE |
0.500-20 AND 0.500-20 |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.406 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
62983 |
| AXFC |
CONNECTION DESIGN |
THREADED AND THREADED |
| AJLF |
HOUSING MATERIAL |
ALUMINUM ALLOY |
| ABTB |
MOUNTING HOLE DIAMETER |
0.281 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAXX |
MOUNTING TYPE |
FLANGE |
| AEQC |
OPERATING SPEED AT RATED CAPACITY IN RPM |
6060.0 |
| ZZZV |
III FSC APPLICATION DATA |
AIRCRAFT HYDRAULIC SYSTEM C130 |
| AJAB |
DRIVE SHAFT TYPE |
SPLINED, INVOLUTE INTERNAL |
| AZFG |
MOUNTING BOLT HOLE SPACING |
1.876 IN. BY 1.876 IN. C TO C |
| APJC |
THREAD LOCATION |
INTERNAL AND INTERNAL |
| AXFN |
MOUNTING GOVERNMENT STANDARD |
AND10261 |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNF AND UNF |
| ASMM |
CONNECTION QUANTITY |
1 AND 1 |
| AKCT |
SHAFT ROTATION DIRECTION |
CLOCKWISE |
| AAUH |
SPLINE MINOR DIAMETER |
0.351 INCHES NOMINAL |
| AAPL |
TORQUE LOAD RATING |
45.4 INCH-POUNDS |
| ABTJ |
MOUNTING HOLE QUANTITY |
4 |
| AZFE |
CONNECTION GOVERNMENT SPEC/STD |
AND10050-5 AND AND10050-5 |
| ASAP |
SPLINE PITCH |
32/64 |
| SR-5 |
DESIGN CONTROL REFERENCE |
MF24-3906-30BCS394-4 |
