| MRC |
Requirement Statement |
Characteristics |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
1.767 INCHES BOTH ENDS |
| CWWS |
FIRST STEP NOMINAL LENGTH |
1.365 INCHES FIRST END 0.938 INCHES SECOND END |
| ALPN |
FACE TYPE |
CONCAVE |
| CWTR |
HUB STYLE DESIGNATOR |
2 STEPS BOTH ENDS |
| AGJS |
PITCH DIAMETER |
3.2160 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| MATT |
MATERIAL |
STEEL OVERALL |
| CWWH |
END NOMINAL LENGTH |
0.875 INCHES FIRST END 1.250 INCHES SECOND END |
| CWPP |
PRESSURE ANGLE |
27.5000 DEGREES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWPZ |
HELIX ANGLE |
4.9500 DEGREES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
3.240 INCHES FIRST END 3.188 INCHES SECOND END |
| CWXL |
SECOND STEP NOMINAL DIAMETER |
1.772 INCHES BOTH ENDS |
| CWXG |
SECOND STEP NOMINAL LENGTH |
1.000 INCHES BOTH ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
3.782 INCHES |
| CWRM |
FACE NOMINAL WIDTH |
6.073 INCHES |
| CWWN |
END NOMINAL DIAMETER |
1.000 INCHES FIRST END 1.250 INCHES SECOND END |
| CWPH |
THREAD FORM DIRECTION |
RIGHT-HAND |
| CWPC |
THREAD FORM QUANTITY |
1 |
