| MRC |
Requirement Statement |
Characteristics |
| ABTB |
MOUNTING HOLE DIAMETER |
0.073 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 PIN |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
85.0 SINGLE SECTION |
| AEHT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.200 INCHES NOMINAL |
| AKPV |
MOUNTING FACILITY QUANTITY |
2 |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AARG |
RELIABILITY INDICATOR |
ESTABLISHED |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILR39015-2 |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABHP |
III OVERALL LENGTH |
0.555 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.515 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
0.205 INCHES NOMINAL |
| AGTP |
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS |
0.520 INCHES NOMINAL |
| ABXF |
SHAFT LENGTH |
0.045 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION |
| ABJT |
TERMINAL LENGTH |
0.172 INCHES MINIMUM |
| ABKW |
III OVERALL HEIGHT |
0.662 INCHES MINIMUM |
| ABMK |
III OVERALL WIDTH |
0.205 INCHES NOMINAL |
| AARH |
RELIABILITY FAILURE RATE LEVEL IN PERCENT |
0.100 |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.000 OHMS SINGLE SECTION |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M39015/2-003XP |
| APXH |
TERMINAL LOCATION |
LOWER ADJACENT SIDE SINGLE ROW |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0 TO 5.0 SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.078 INCHES NOMINAL |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE AND TERMINAL |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
150.0 SINGLE SECTION |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
0.75 FREE AIR SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.500 INCHES NOMINAL |
| CQCM |
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL |
0.100 INCHES NOMINAL |
| AAQL |
BODY STYLE |
RECTANGULAR W/MOUNTING HOLES |
| AAPN |
SECTION QUANTITY |
1 |
| CRFJ |
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS |
-50.0 TO 50.0 SINGLE SECTION |
