| MRC |
Requirement Statement |
Characteristics |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.180 INCHES NOMINAL |
| AHTX |
INSERTION LOSS IN DECIBELS |
0.20 SINGLE |
| CQYJ |
MOUNTING FACILITY PATTERN |
TWO POSITION IN-LINE SINGLE MOUNTING FACILITY PATTERN |
| ABKW |
OVERALL HEIGHT |
1.810 INCHES NOMINAL |
| AKQA |
RF MAXIMUM VOLTAGE RATING |
500.0 VOLTS PEAK |
| ACZB |
FREQUENCY RATING |
0.0 GIGAHERTZ MINIMUM AND 2.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY OPERATING 0.0 GIGAHERTZ MINIMUM AND 2.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY RF POWER HANDLING 0.0 GIGAHERTZ MINIMUM AND 2.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY VOLTAGE STANDING WAVE RATIO 0.0 GIGAHERTZ MINIMUM AND 2.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY INSERTION LOSS REFERENCE 0.0 GIGAHERTZ MINIMUM AND 2.0 GIGAHERTZ MAXIMUM SINGLE FREQUENCY CROSSTALK REFERENCE |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 CONNECTOR, RECEPTACLE AND 4 RECEPTACLE, COAXIAL |
| ABMK |
OVERALL WIDTH |
1.810 INCHES NOMINAL |
| AKPJ |
ACTUATOR VOLTAGE IN VOLTS |
115.0 NOMINAL |
| AKRC |
COUPLING POSITION QUANTITY |
4 |
| AKPN |
SWITCH OPERATION SEQUENCE |
BREAKS BEFORE MAKES |
| AHUC |
COAXIAL CONNECTOR SERIES DESIGNATION |
TNC |
| AKPQ |
SWITCH RETURN MECHANISM TYPE |
FAIL-SAFE |
| PRMT |
III PRECIOUS MATERIAL |
RHODIUM AND SILVER |
| AKPE |
ACTUATOR CURRENT TYPE AND RATING IN AMPS |
0.1 AC MAXIMUM |
| ABHP |
OVERALL LENGTH |
3.940 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
RHODIUM AND SILVER BODY OUTSIDE SURFACES RHODIUM AND SILVER CONNECTOR(S) OUTSIDE SURFACES |
| AAQL |
BODY STYLE |
RECTANGULAR |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
BODY AND CONNECTOR SURFACES RHODIUM AND BODY AND CONNECTOR SURFACES SILVER |
| AKNV |
MINIMUM CROSSTALK RATING IN DECIBELS |
80.0 SINGLE |
| MATT |
MATERIAL |
COPPER ALLOY BODY |
| AKNF |
RF POWER HANDLING CAPABILITY |
100.0 WATTS AVERAGE SINGLE |
| AHUD |
CONNECTOR END DESIGN |
MALE |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
| AKPC |
ACTUATOR OPERATING METHOD |
RELAY |
| AHTW |
VOLTAGE STANDING WAVE RATIO |
1.20 SINGLE |
| AEEA |
SWITCH TYPE |
TRANSFER |
| AEJN |
DISTANCE BETWEEN MOUNTING FACILITY CENTERS |
1.437 INCHES NOMINAL SINGLE MOUNTING FACILITY PATTERN |
