| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 1412582 | NAVAIR AND NAVSEA MANAGED | 10001 | D | 9 | 6 | ||||
| 1412582-32 | NAVAIR AND NAVSEA MANAGED | 10001 | 3 | 2 | 6 | ||||
| 45-037 | LOCKHEED MARTIN CORPORATION | 56232 | D | 9 | 6 | ||||
| 45-037-32 | LOCKHEED MARTIN CORPORATION | 56232 | 5 | 2 | 6 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AJLA | TEETH QUANTITY | 32 |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | 0.094 INCHES |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| AAQL | BODY STYLE | PLAIN, SOLID |
| CWWN | END NOMINAL DIAMETER | 0.250 INCHES FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWWH | END NOMINAL LENGTH | 0.245 INCHES FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.708 INCHES |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| AGJS | PITCH DIAMETER | 0.6666 INCHES MINIMUM AND 0.6667 INCHES MAXIMUM |
| CWRS | BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.036 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.375 INCHES FIRST END |
