| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 11L2 3-16 | INCOM INTL INC | 71041 | 3 | 2 | 2 | ||||
| 351-1106 | KENT MACHINE CO THE DIV OF THE | 33249 | 3 | 2 | 2 | ||||
| LAK2 3-16 | TIMKEN AEROSPACE INC | 21335 | 3 | 2 | 2 | ||||
| LAK2-3-16 | TIMKEN AEROSPACE INC | 21335 | 3 | 2 | 2 | ||||
| PL3Y235H | REXNORD INDUSTRIES INC | 19382 | 3 | 2 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| ANKF | SEAL LOCATION | BOTH ENDS |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, SOLID |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| ABTD | MOUNTING SLOT WIDTH | 0.6875 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.4375 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| LBMA | LUBRICATION MATERIAL | GREASE |
| AMCL | BLOCK TYPE | FIXED |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 7.1250 INCHES NOMINAL |
| ANJS | SHAFT END TYPE | OPEN |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| ABVG | MOUNTING SLOT LENGTH | 0.9375 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 9.1250 INCHES NOMINAL |
| MATT | MATERIAL | IRON CAST HOUSING STEEL SEAL |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| AGNF | BASE LENGTH | 2.3750 INCHES NOMINAL |
| ANKH | COLLAR LOCATION | ONE END |
| ACYB | BASE THICKNESS | 1.0000 INCHES NOMINAL |
| AHZC | ASSEMBLY OVERALL LENGTH | 2.9063 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| AFWC | HOUSING HEIGHT | 4.9062 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.1875 INCHES NOMINAL |
