| MRC |
Requirement Statement |
Characteristics |
| MATT |
MATERIAL |
STEEL COMP 1018 OR STEEL COMP 1117 |
| AAHP |
SECOND END STYLE |
TWO CIRCULAR GROOVES, SPLINED AND INTERNALLY THREADED |
| ATPC |
STEP QUANTITY |
15 |
| AMCY |
FIRST END DISTANCE FROM END TO GROOVE |
0.085 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES |
| AMFD |
FIRST END DISTANCE BETWEEN SECOND AND THIRD GROOVE CENTERS |
0.257 INCHES NOMINAL |
| AMFC |
FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS |
0.247 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM |
| AMGA |
SECOND END SPLINE LENGTH |
0.594 INCHES NOMINAL |
| AMHP |
SECOND END INTERNAL THREAD LENGTH |
1.000 INCHES NOMINAL |
| CSPY |
LARGEST STEP DIAMETER |
1.400 INCHES NOMINAL |
| AAHX |
SECOND END GROOVE DIAMETER |
0.9062 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
THREE CIRCULAR GROOVES |
| AMHT |
SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS |
0.762 INCHES NOMINAL |
| AMGB |
SECOND END SPLINE MINOR DIAMETER |
0.9630 INCHES MINIMUM AND 0.9730 INCHES MAXIMUM |
| AMGC |
SECOND END SPLINE MAJOR DIAMETER |
1.1230 INCHES MINIMUM AND 1.1240 INCHES MAXIMUM |
| AAHH |
FIRST END GROOVE DIAMETER |
0.9740 INCHES MINIMUM AND 0.9940 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE |
| AAHG |
FIRST END GROOVE WIDTH |
0.0950 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM |
| BDSR |
SECOND END SPLINE QUANTITY |
10 |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
0.5938 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
6.375 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| AAHW |
SECOND END GROOVE WIDTH |
0.1750 INCHES NOMINAL |
