| MRC |
Requirement Statement |
Characteristics |
| ABFE |
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
EXPLOSION PROOF |
| CTHF |
CONTACT LOAD CURRENT RATING |
25.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 100.0 MILLIAMPERES RESISTIVE LOAD AND 10.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| AKPY |
THROW QUANTITY |
7 SINGLE SECTION REAR |
| CSHW |
CONTACT SWITCHING ACTION |
MAKES BEFORE BREAKS SINGLE SECTION REAR |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES SINGLE MOUNTING FACILITY |
| ADAV |
OVERALL DIAMETER |
0.720 INCHES MAXIMUM |
| ABNB |
FIRST FLAT LENGTH |
0.375 INCHES NOMINAL SINGLE ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
1 |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| ABNC |
FLAT HEIGHT |
0.095 INCHES NOMINAL SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL SINGLE ACTUATOR |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
0.500 TO 2.000 INCH-POUNDS SINGLE ACTUATOR |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
7 SINGLE ACTUATOR |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
270.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| ABHP |
OVERALL LENGTH |
3.310 INCHES NOMINAL |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AFDC |
NONTURN DEVICE TYPE |
FLATTED BUSHING AT 3:00 O'CLOCK |
| ABXF |
SHAFT LENGTH |
2.250 INCHES NOMINAL SINGLE ACTUATOR |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| AKPX |
POLE QUANTITY |
1 SINGLE SECTION REAR |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
115.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL |
| AASA |
THREAD LENGTH |
0.310 INCHES NOMINAL SINGLE MOUNTING FACILITY |
