| MRC |
Requirement Statement |
Characteristics |
| ADAV |
III OVERALL DIAMETER |
1.515 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-R-94 |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
LOCKING BUSHING |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-94/5 GOVERNMENT SPECIFICATION |
| ABPM |
BODY DIAMETER |
1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
70.0 SINGLE SECTION |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
RV4LAYSD501A |
| AEFM |
MAXIMUM STOP TORQUE |
128.00 INCH-OUNCES |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CSDL |
STANDARD TAPER CURVE PER SECTION |
A SINGLE SECTION |
| ABHP |
III OVERALL LENGTH |
1.312 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFP |
NONTURN DEVICE RADIUS |
0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| ABXF |
SHAFT LENGTH |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
120.0 SINGLE SECTION |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-10.0 TO 10.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
309.0 MINIMUM AND 320.0 MAXIMUM |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
500.0 OHMS SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| ADAP |
MOUNTING BUSHING LENGTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AAPN |
SECTION QUANTITY |
1 |
| AEFK |
MAXIMUM STARTING TORQUE |
6.00 INCH-OUNCES |
