| MRC |
Requirement Statement |
Characteristics |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNF FIRST END |
| MATL |
MATERIAL |
STEEL, CORROSION RESISTING |
| CFFL |
WORM PITCH DIAMETER |
0.436 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
10512780 |
| CFFD |
WORM THREAD DIRECTION |
LEFT-HAND |
| CFFM |
SHAFT HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
19200 |
| CFFW |
SHAFT LOCATION |
BOTH ENDS OF WORM |
| CFFK |
WORM OUTSIDE DIAMETER |
0.513 INCHES MINIMUM AND 0.518 INCHES MAXIMUM |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.105 INCHES MINIMUM FIRST END, FIRST PORTION 0.130 INCHES MAXIMUM FIRST END, FIRST PORTION 0.240 INCHES MINIMUM FIRST END, SECOND PORTION 0.250 INCHES MAXIMUM FIRST END, SECOND PORTION 0.205 INCHES MINIMUM FIRST END, THIRD PORTION 0.215 INCHES MAXIMUM FIRST END, THIRD PORTION 0.240 INCHES MINIMUM FIRST END, FOURTH PORTION 0.250 INCHES MAXIMUM FIRST END, FOURTH PORTION 0.1015 INCHES MINIMUM FIRST END, SIXTH PORTION 0.1115 INCHES MAXIMUM FIRST END, SIXTH PORTION 0.2125 INCHES MINIMUM SECOND END, FIRST PORTION 0.2425 INCHES MAXIMUM SECOND END, FIRST PORTION 0.500 INCHES MINIMUM SECOND END, SECOND PORTION 0.510 INCHES MAXIMUM SECOND END, SECOND PORTION 1.750 INCHES NOMINAL SECOND END, THIRD PORTION |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CFFQ |
WORM BODY TAPERED BEARING SURFACE END |
NOT PROVIDED |
| CFFC |
WORM THREAD LEAD |
0.125 INCHES NOMINAL |
| CFFP |
WORM BODY LENGTH |
0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| CFFF |
WORM PRESSURE ANGLE IN DEG |
14.500 |
| CFFG |
WORM HELIX ANGLE |
5 DEG 11 MIN |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.310 INCHES MINIMUM FIRST END, FIRST PORTION 0.320 INCHES MAXIMUM FIRST END, FIRST PORTION 0.277 INCHES MINIMUM FIRST END, SECOND PORTION 0.279 INCHES MAXIMUM FIRST END, SECOND PORTION 0.330 INCHES MINIMUM FIRST END, THIRD PORTION 0.340 INCHES MAXIMUM FIRST END, THIRD PORTION 0.3146 INCHES MINIMUM FIRST END, FOURTH PORTION 0.3150 INCHES MAXIMUM FIRST END, FOURTH PORTION 0.240 INCHES MINIMUM FIRST END, SIXTH PORTION 0.250 INCHES MAXIMUM FIRST END, SIXTH PORTION 0.310 INCHES MINIMUM SECOND END, FIRST PORTION 0.320 INCHES MAXIMUM SECOND END, FIRST PORTION 0.240 INCHES MINIMUM SECOND END, SECOND PORTION 0.250 INCHES MAXIMUM SECOND END, SECOND PORTION 0.310 INCHES MINIMUM SECOND END, THIRD PORTION 0.311 INCHES MAXIMUM SECOND END, THIRD PORTION |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND FIRST END, FIFTH PORTION |
| ZZZV |
III FSC APPLICATION DATA |
MOUNT,TELESCOPE |
| AASA |
THREAD LENGTH |
0.261 INCHES NOMINAL FIRST END, FIFTH PORTION |
| SURF |
SURFACE TREATMENT |
PASSIVATED |
| ABHP |
OVERALL LENGTH |
4.410 INCHES NOMINAL |
| CFFN |
WORM THREAD SECTION LENGTH |
0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| CFFB |
WORM THREAD QUANTITY |
1 |
| BYFR |
TEETH HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM |
