| MRC |
Requirement Statement |
Characteristics |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES |
| FEAT |
SPECIAL FEATURES |
ENDS CHAMFERED 30 DEG TO DEPTH OF0.026 NOMINAL,HARDNESS ROCKWELL C 40.0MIN 47.0 MAX |
| AMGS |
SECOND END HOLE DIAMETER |
0.0920 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM |
| AMDZ |
FIRST END DISTANCE FROM HOLE CENTER TO END |
0.090 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
362888-1 |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMFZ |
SECOND END DIAMETER |
0.3680 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAGZ |
FIRST END STYLE |
UNTHREADED CROSS DRILLED |
| SR-5 |
MANUFACTURERS CODE |
59364 |
| ABHP |
OVERALL LENGTH |
1.505 INCHES MINIMUM AND 1.525 INCHES MAXIMUM |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| AAHP |
SECOND END STYLE |
UNTHREADED CROSS DRILLED |
| AMDL |
FIRST END DIAMETER |
0.3680 INCHES MINIMUM AND 0.3700 INCHES MAXIMUM |
| AMDX |
FIRST END HOLE DIAMETER |
0.0620 INCHES MINIMUM AND 0.0630 INCHES MAXIMUM |
