| MRC |
Requirement Statement |
Characteristics |
| ADQB |
SECURING DEVICE TYPE |
HINGE AND TURNLOCK FASTENER |
| ADNY |
DISTANCE BETWEEN HOLES ALONG LENGTH |
2.920 INCHES NOMINAL |
| ADNW |
HOLE QUANTITY ALONG WIDTH |
11 |
| ADNZ |
DISTANCE BETWEEN HOLES ALONG WIDTH |
1.564 INCHES NOMINAL |
| ADPC |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH |
1.640 INCHES NOMINAL |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGLE, MULTI HOLES |
| ADNV |
HOLE QUANTITY ALONG LENGTH |
10 |
| ADPR |
BODY THICKNESS |
0.550 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ARCHED |
| ADPD |
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH |
2.270 INCHES NOMINAL |
| ABRY |
LENGTH |
26.000 INCHES NOMINAL |
| SR-5 |
DESIGN CONTROL REFERENCE |
16B1582-39 |
| ADPA |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH |
1.080 INCHES NOMINAL |
| ADPK |
CORNER HOLE CENTERLINE RADIUS |
0.125 INCHES NOMINAL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ABGL |
WIDTH |
23.000 INCHES NOMINAL |
| ADPQ |
INSIDE CORNER RADIUS |
3.137 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
F-16 |
| FEAT |
SPECIAL FEATURES |
RH LOWER STRAKE FS190 TO FS217 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4 FED SPEC 1ST MATERIAL RESPONSE AND QQ-A-250/11 FED SPEC 2ND MATERIAL RESPONSE |
| SR-5 |
MANUFACTURERS CODE |
81755 |
| ADPB |
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH |
2.660 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 6061 |
